DIY: 4 Ways to Fix Your Boiler Before Calling an Engineer

April 19, 2023 | News

DIY boiler repairs

Boilers are essential for keeping our homes warm and comfortable, especially during the colder months. However, like any appliance, they can sometimes experience issues that may affect their performance. Before you call an engineer to inspect your boiler, there are a few simple troubleshooting steps you can try yourself. Here are four ways to potentially fix your boiler before resorting to professional help:

  1. Check the pressure:
    Low boiler pressure can lead to issues with your central heating system. To check the pressure, locate the pressure gauge on your boiler. The ideal pressure for most boilers is between 1 and 1.5 bar. If it’s below 1 bar, you may need to repressurise your boiler. To do this, consult your boiler manual for instructions on how to refill the system or adjust the filling loop. Keep an eye on the pressure gauge while you do this, and make sure not to exceed 1.5 bar.
  2. Reset your boiler:
    Sometimes, a simple reset can resolve any boiler issues. Locate the reset button on your boiler, typically found on the control panel. It may be marked with an ‘R’ or a circular arrow symbol. Press and hold the reset button for a few seconds, then wait for your boiler to restart. If your boiler doesn’t have a reset button, refer to the user manual for instructions on how to reset the system.
  3. Inspect the thermostat:
    A faulty thermostat can cause your boiler to function inefficiently or not at all. To check the thermostat, ensure it’s set to the correct temperature and that the clock is displaying the correct time. If you have a digital thermostat, replace the batteries if necessary. If the thermostat still isn’t working, you may need to replace it or consult an engineer.
  4. Look for frozen pipes:
    During extremely cold weather, the condensate pipe of your boiler may freeze, causing your boiler to stop working. This pipe is usually located outside your home and is responsible for expelling excess condensation. To defrost the pipe, apply warm (not boiling) water along its length or use a hot water bottle. Once the ice has melted, reset your boiler.

If you’ve tried these troubleshooting steps and your boiler is still not working, it’s time to call a Gas Safe registered engineer to inspect the system and diagnose the issue. Regular boiler maintenance and servicing can help prevent future problems and keep your home warm and comfortable all year round.

FAQ: Common Boiler Troubleshooting Questions

Q: Why is my boiler not producing heat? A: If your boiler is not producing heat, check the thermostat settings, ensure the boiler is switched on, and verify that there are no issues with the power supply. If these aspects are functioning correctly, it may be time to call an engineer for further inspection.

Q: Why is my boiler making strange noises? A: Boilers can produce various noises due to different reasons, such as trapped air, limescale build-up, or low water pressure. If bleeding your radiators doesn’t solve the problem, it’s best to consult a Gas Safe registered engineer for a thorough assessment.

Q: How do I know if my boiler pressure is too low or too high? A: Check the pressure gauge on your boiler. The ideal pressure is typically between 1 and 1.5 bar. If the pressure is below 1 bar, you may need to repressurise your boiler. If the pressure is consistently above 1.5 bar, consult an engineer for assistance.

Q: How often should I service my boiler? A: It’s recommended to have your boiler serviced annually by a Gas Safe registered engineer. Regular servicing can help identify and fix potential issues, maintain efficiency, and prolong the lifespan of your boiler.

Q: What is a Gas Safe registered engineer? A: A Gas Safe registered engineer is a professional who has completed the required training and certification to work safely and legally on gas appliances, such as boilers. Always ensure that any engineer you hire to work on your boiler is Gas Safe registered.

Q: Can I install a new boiler myself? A: No, installing a new boiler should always be done by a Gas Safe registered engineer. Incorrect installation can lead to dangerous situations, such as gas leaks, carbon monoxide poisoning, or even explosions.

Open chat
How can we help?